Ningbo Tuxin Communication Equipment Co., Ltd.
Ningbo Tuxin Communication Equipment Co., Ltd.
Add to Cart
19 Inch Server Rack 42u Network Equipment Cabinet with glasa door in tuxin
Features:
1. Comply with ANSI/EIA;RS-310-D;IEC297-2;DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard;compatible with 19’’ international standard, metric system and EISI standard.
2. The overall use of the frame structure,easy to install.
3. Front door with perforated,back door steel plate.
4. Using the upper and lower line way,can be closed up
and down the alignment channel.large hole size in
bottom can be adjusted.
5. Can easily remove the left and right side doors and
front/rear doors.
6. Install high-speed silent cooling fan at the top of the
cabinet.
7. The bottom of the installation of the steeling wheel
to facilitate the movement, through the foot so that
the overall balance.
8. Front door with elastic lock,solid and cabinet
connection.
Surface finish:
Degreasing, pickling, phosphating, powder coating.
Material and Thickness:
Mounting profile:2.0mm
Others:1.2mm
Color:
RAL9004(black)
RAL7044(gray)
| Brand: | TUXIN | Column spacing: | 465mm (19 inch) |
| No: | NA6642 | Material: | SPCC cold rolled steel |
| Size: | 600mm*600mm*42U | Function: | Can install server equipment,the router,patch panel,KVM,UPS,Network device,etc. |
| IOS test: | Pass ISO9001:2008 Qualtiy System | Thickness: | Mounting Profile: 2.0mm,others: 1.2-1.5mm |
| Surface treatment: | Degreasing,pickling,phosphating,power coating,etc. | Configuration: | Cage nuts and M6 screws: 20 sets. |
| Standard: | Comply with ANSI/EIA RS-310-D,IEC297-2,DIN41491;PARTI,DIN41494;PART7,GB/T3047.2-92 standard; compatible with ETSI standard. | Device Installation: | It is recommended to install network equipment/server device within 350 mm depth. |
composition
The network cabinet is composed of a frame and a cover (door), generally having a cuboid shape and placed on the floor. It provides a suitable environment and safety protection for the normal operation of electronic devices. This is second only to the system-level primary assembly. A cabinet that does not have a closed structure is called a rack.
| Order Codes | Capacity | W*D*H(mm) |
| TX-PB*6615 | 15U | 600*600*800 |
| TX-PB*6620 | 20U | 600*600*1000 |
| TX-PB*6624 | 24U | 600*600*1200 |
| TX-PB*6627 | 27U | 600*600*1400 |
| TX-PB*6632 | 32U | 600*600*1600 |
| TX-PB*6637 | 37U | 600*600*1800 |
| TX-PB*6642 | 42U | 600*600*2000 |
| TX-PB*6647 | 47U | 600*600*2200 |
| TX-PB*6824 | 24U | 600*800*1200 |
| TX-PB*6832 | 32U | 600*800*1600 |
| TX-PB*6837 | 37U | 600*800*1800 |
| TX-PB*6842 | 42U | 600*800*2000 |
| TX-PB*6924 | 24U | 600*900*1200 |
| TX-PB*6932 | 32U | 600*900*1600 |
| TX-PB*6937 | 37U | 600*900*1800 |
| TX-PB*6942 | 42U | 600*900*2000 |
| TX-PB*6024 | 24U | 600*1000*1200 |
| TX-PB*6032 | 32U | 600*1000*1600 |
| TX-PB*6037 | 37U | 600*1000*1800 |
| TX-PB*6042 | 42U | 600*1000*2000 |
| TX-PB*8642 | 42U | 800*600*2000 |
| TX-PB*8842 | 42U | 800*800*2000 |
| TX-PB*8042 | 42U | 800*1000*2000 |
Quality requirements:
Network cabinets should have good technical performance. The structure of the cabinet should be based on the electrical and mechanical properties of the equipment and the requirements of the use of the environment, the necessary physical design and chemical design, to ensure that the cabinet structure has good stiffness and strength and good electromagnetic isolation, grounding, noise isolation, ventilation and heat dissipation And other properties. In addition, the network cabinet shall have anti-vibration, anti-impact, anti-corrosion, dust-proof, waterproof, radiation-proof properties to ensure the stable and reliable operation of the equipment. The network cabinet should have good usability and safety protection facilities, be easy to operate, install and maintain, and can guarantee operator safety. The network cabinet should be easy to produce, assemble, debug and package and transport. Network cabinets should meet the requirements of standardization, normalization, and serialization. The cabinet is beautiful in appearance, applicable, and coordinated in color.
FAQ
1.Q: Are you a factory or trading company?
A:We are a Factory, Distributor and Trading Company.
2.Q: Where is your factory located? How can I visit there?
A: Our factory and office is located in Ningbo, China.
You can fly to Ningbo or Shanghai airport,Warmly welcome to visit us!
3. Q:Can you do OEM?
A: Sure,we can do OEM products.
4. Q:How can I get some samples?
A: We are honored to offer you samples.
5. Q:How does your factory promise quality control?
A: Quality is priority.We always attach great importance to quality
controlling.Our factory has gained CE,ROHS authentication.